KEYESTUDIO stepper motor driver module and stepper motor KS0140, 5V SKU: KS0140

Description

KEYESTUDIO stepper motor driver module and stepper motor KS0140, 5V

Stepper motor driver module and stepper motor by Keyestudio. It can convert electrical impulses into discrete mechanical movements.

-The rotation angle of the motor is proportional to the input pulse
-The motor has full torque at standstill (if the windings are energized)
-Precise positioning and repeatability of movement
-Excellent start/stop/reverse response
-Very reliable as there are no contact brushes in the motor
-The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control
- It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft
-A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses

Instructions for use:
https://www.data-media.gr/files/KS0140.pdf

Specifications
Model: 28BYJ-48
Rated voltage: 5VDC
Number of Phases: 4
Speed Variation Ratio: 1/64
Stride Angle: 5.625° /64
Frequency: 100Hz
DC resistance: 50Ω±7%(25?)
Idle In-traction Frequency: > 600Hz
Idle Out-traction Frequency: > 1000Hz
In-traction Torque >34.3mN.m(120Hz)
Self-positioning Torque >34.3mN.m
Friction torque: 600-1200 gf.cm
Pull in torque: 300 gf.cm
Insulated resistance >10MΩ(500V)
Insulated electricity power: 600VAC/1mA/1s
Insulation grade: A
Rise in Temperature <40K(120Hz)

Note
The product is specialized and technical knowledge is required.
The warranty does not cover damage caused by incorrect wiring.